High Quality Panel Water Flowmeter, Flow Meter 160ml/min, Flow Meter 250ml/min Suppliers in China

Home > Products > 0~160ml/min > Water Flowmeter Panel Type 160ml/min 250160ml/min

Water Flowmeter Panel Type 160ml/min 250160ml/min

Water Flowmeter Panel Type 160ml/min 250160ml/min

    Payment Type: L/C,T/T,D/P,Western Union
    Terms of Trade: FOB,CIF,CIP
    Min. Order: 20 Piece/Pieces
    Delivery Time: 7 Days
    Packaging: Carton
    Productivity: 5000 sets per month
    Brand: RMI PLAST
    Transportation: Ocean,Air
    Place of Origin: China mainland
    Supply Ability: 5000 sets per month
    Certificate: SGS
    HS Code: 902610
    Port: Ningbo,Shanghai,Hangzhou

Basic Info

Model No.: LZM

Product Description

LZM flowmeter is generally installed on the control panel, and its water inlet and outlet are on the back, so customers must set up water inlet and outlet interface and instrument fixing screw hole before installation.

The panel type flow meter is mainly made up of floating ball, guide rod, body and external connection, which has good corrosion resistance. The product also has the characteristics of reasonable structure, small volume, light weight, and the cone tube is not easy to be broken. The panel type organic glass rotor flowmeter can be widely used in water purification equipment, chemical industry, environmental protection, petroleum, medicine, food and other industrial sectors. It can also be used in laboratory and other scientific research.

Installation of panel flow meter

The flow meter should be installed vertically without obvious inclination, otherwise it is easy to cause measurement error. That is, the angle between the center line of the flowmeter and the plumb line should be less than 5 degrees.

The installation height of the panel flow meter should be approximately in line with the line of sight of the user, so as to facilitate the reading of the float height measurement. When reading, the line of sight should be horizontally aligned with the float measuring surface.

For the installation of panel flow meter, 5D straight pipe section (i.e. 5 times the diameter of the instrument) shall be ensured in the upstream and downstream inlet and outlet pipes. In this way, the measurement is relatively stable.

When measuring the panel flowmeter, it is also necessary to make the fluid pressure stable. If the fluid pressure is unstable, the float will fluctuate and the measurement can not be correct. Therefore, a buffer or a constant value device should be set at the upstream of the flowmeter.

In the measurement of panel flowmeter, the general standard is that the best flow rate is 50% - 70% of the maximum flow rate of the flowmeter, and the maximum value should not be used as far as possible. This is beneficial to the working stability and service life of the instrument.

Basic specification
Connection: thread or customized 1/2" ~2"
Body Material: ABS
Floater material: SS304
Measuring range: 6ml/min~2000LPM
Accuracy: 4%
Design pressure: 1.0Mpa (PN10 bar)





Ningbo RMI Plastic Co.,Ltd


we are a professional manufacturer and exporter of plastic valves and piping materials, provide consult service and supply high quality piping materials for industrial application, water treatment system, irrigation systems, etc.

RMI products cover full range of plastic valves, pipes, fittings and accessories by different materials of PVDF, PVC, PVC-C, PP, PP-H, PP-GF, FRP, EPDM, VITON, PTFE. Over 30 kinds different valves include diaphragm valve, ball valve, check valve, butterfly valve, foot valve, globe valve, etc. Size from 1/2" up to 32", following standard of DIN, JIS, ANSI, CNS, ISO. 8 different materials of pipes and fittings diameter from 16mm to 600mm.

With high quality products and professional technical support, we serve more than 200 customers in different industries and areas all around the world, and win good reputation. Especially in steel industrial, chloride alkali industry, metallurgical industry, paper making industry, pharmaceutical factory, electroplating factory, mining plant, fish farm, etc.

We are continual working for the target of quality improving, technical innovation and service satisfied. Aim to provide customer durable and efficient products to ensure the piping system working safer and longer.

Company Info

  • Company Name: Ningbo RMI Plastic Co.,Ltd
  • Representative: Ms Shen
  • Product/Service: PVC PP PVDF Diaphragm Valve , PP PVC Butterfly Valve , Plastic Valve , PVC Pipe Fitting , PVC check valve , PVC Ball Valve
  • Capital (Million US $): 1000000RMB
  • Year Established: 2006
  • Total Annual Sales Volume (Million US $): Below US$1 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: Above 20
  • No. of R&D Staff: Fewer than 5 People
  • No. of QC Staff: Fewer than 5 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 5,000-10,000 square meters
  • Factory Location: Chunxiao Industrial zone, Beilun Dist, Ningbo, China
  • Contact Person: Mr. Zheng
  • Tel: 86-189-06745650
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters